| Date: | Thu, 13 Jul 2000 19:32:52 |
| Subject: | Re: gas ports |
| From: | Mike _____ |
| Reply to author Post followup (list members only) Back to index Subscribe to the mailing list Unsubscribe from the list |
too much oil.
>From: Peter Staal
>Reply-To: moped@topica.com
>To: moped@topica.com
>Subject: Re: gas ports
>Date: Thu, 13 Jul 2000 13:54:06 -0700
> >hi
>blud object, old screwdriver like that.
>don't make scraches in the metal, or hit the cylinder walls during your
>'job' , could protect it bij putting in a piece of cardboard.
>finish it off by polishing the walls with fine sand paper.
>wash (very) clean with petroleum before use.
>make sure the intake connects smooth (internaly !) , no pieces of gasket in
>the flow..
>same goes for the exhaust.
>..dirty inlet...what happend ?
>peter
>----- Oorspronkelijk bericht -----
>Van: Mike _____
>Aan:
>Verzonden: donderdag 13 juli 2000 17:30
>Onderwerp: gas ports
> > > anyone know the correct way to clean intake ports and exhaust port on a
> > cylinder of a 50 cc moped???
> > > > Mike
> > > > 1991 Tomos Bullet TT
> > 1976 Motobecane 40V
> > >list.
> > > >list.
| Reply to author Post followup (list members only) Back to index Subscribe to the mailing list Unsubscribe from the list |
